Office Print Ordering: A Scenario-Based Guide to Templates, Coupons, and the Mistakes I've Made
Why There's No Single "Best" Way to Order Printing
I manage printing for a 180-person company. Roughly $38,000 last year across GotPrint and two other vendors. Before I took over purchasing in 2020, the person in my role used to just forward everything to the local print shop and hope for the best.
Here's what I've learned after processing maybe 400 orders: the advice that works for ordering business cards is terrible for ordering event posters. The way you should handle a coupon code depends on what's in your cart. And international mailing? That's a whole different checklist.
So instead of giving you one generic "here's how to order printing" list, I'm breaking this down into three scenarios. Find the one that matches most of your orders, and use that section. You might bounce between two of them depending on the week.
The Three Scenarios
- Scenario A: Standard office materialsâbusiness cards, letterhead, envelopes, internal forms. Recurring, predictable, low creativity.
- Scenario B: Event and marketing piecesâposters, flyers, banners, promotional materials. Deadline-driven, design-heavy.
- Scenario C: International and special-handling ordersâanything crossing a border or requiring specific formatting.
If you're not sure which you are, skip to the end. I've got a short quiz.
Scenario A: Standard Office Materials
This is the bulk of my work. Business cards for new hires, replenishing letterhead, reordering envelopes. Maybe 60% of my orders fall here.
Templates Are Your FriendâUntil They're Not
GotPrint's template library is genuinely useful. I'm not going to pretend otherwise. When I need a business card for a new account manager, I can pull up the saved template, swap the name and title, and submit. Takes maybe 10 minutes.
But I learned the hard way not to assume the template reflects the final product.
"I assumed 'same template' meant identical output across vendors. Didn't verify. Turned out each vendor interpreted 'standard 2-inch height' slightly differently, so the cards from the new supplier were noticeably taller than the old batch. Nobody complained, but I noticed. And I still think about it."
That was in 2022. Now I always order a physical proofâor at minimum, download the PDF preview and measure it. Five minutes of verification beats five days of reordering.
What I check in the template before submitting:
- Bleed margins (GotPrint specs 0.125" on most products)
- Safe zoneâkeep text at least 0.25" from the edge
- Color mode (CMYK, alwaysâRGB gets converted and the blue shifts)
- Resolution: 300 DPI at final size. I don't care what the screen looks like.
The Coupon Code Reality Check
I use GotPrint promo codes. Not going to pretend I don't. The savings on a $400 envelope order can be meaningfulâusually 10-20% depending on the code.
But here's the thing about gotprint coupon codes 2025: the free shipping codes are the ones that sound best and often save you the least. I ran the numbers on one orderâthe "free shipping" code saved $12. The 15% off code on the same order would have saved $48. I didn't catch that until after I hit submit.
Even after choosing the free shipping code, I kept second-guessing. What if the percentage code would've stacked with something? (It wouldn't haveâGotPrint doesn't stack codes. I checked after the fact.) The two days until I saw the invoice were mildly stressful.
My rule now: open a spreadsheet, price the order with each available code, pick the lowest total. Takes 90 seconds. I should have figured that out sooner.
The Business Card Detail Nobody Tells You
When ordering business cards on a template, the most common mistake I seeâand have madeâis forgetting that standard doesn't mean universal.
The US standard business card is 3.5 Ă 2 inches. GotPrint follows that. But if you're ordering for someone who travels internationally or works with EU partners, they might expect the European size (85 Ă 55 mm, or 3.35 Ă 2.17 inches). Small difference. But I've had a UK-based team member complain that their cards "felt small."
Check with your team. Don't assume.
Scenario B: Event and Marketing Pieces
This is where things get interesting. Posters, banners, flyers. I order fewer of these, but they're higher stakesâusually tied to a conference, a hiring event, or a customer-facing campaign.
Nirvana Tour Poster: A Teaching Moment
Last year our design team wanted to print a limited run of event posters for a company anniversary party. The creative lead referenced nirvana tour poster aestheticsâspecifically the high-contrast, saturated grunge look from early '90s gig posters. They asked if GotPrint could handle "that level of color intensity."
I said yes. I assumed digital printing could reproduce anything. Didn't verify.
Turned out the fluorescent pinks and greens in the design were outside the CMYK gamut. The printed proofs came back duller than what was on screen. Not terribleâbut not the poster they designed either. We shifted the palette slightly warmer and it worked, but that was two rounds of proofs and a week of turnaround we hadn't budgeted for.
If you're printing anything design-drivenâposters, album covers, art printsârequest a physical proof before the full run. The screen lies. Every time. Industry standard is Delta E < 2 for brand-critical colors. A Delta E of 2-4 is noticeable to trained eyes; above 4 is visible to most people. If your brand color matters, measure the proof.
Resolution: The Spec You Should Actually Care About
Most B2B buyers don't know this and don't ask, so I'll make it simple:
"For commercial offset printing, the industry minimum is 300 DPI at final size. Large-format posters viewed from a distance can go as low as 150 DPI. Newsprint can handle 170-200 DPI. These aren't suggestionsâthey're the floor. Anything below and you'll see pixelation on the final product."
Quick math: if your image is 3000 Ă 2000 pixels and you're printing at 300 DPI, the maximum size is 10 Ă 6.67 inches. For a larger poster, you need more pixels or a lower DPI (and a viewing distance that forgives it). I've caught two files from our design team that were under-resolution for the intended print size. Both times the team was gratefulâbut only after I told them.
Rush Orders: What the Surcharge Actually Buys You
I had two hours to decide whether to pay for rush processing on a conference banner. Normally I'd get multiple quotes and compare, but there was no time. The event was in four days. Went with GotPrint's 2-day turnaround because it was the only option that fit the timeline.
In hindsight, I should have pushed back on the event timeline earlier. But with the CEO asking for updates, I made the call with incomplete information. The banner arrived on time and looked fine. The rush fee added 35% to the order. I don't regret itâbut I do think about the fact that if I'd planned two weeks earlier, I could have saved about $180.
Rush premiums generally run +25-50% for 2-3 day turnaround and +50-100% for next business day, depending on the printer. Build the buffer. Even three extra days helps.
Scenario C: International and Special-Handling Orders
This is the scenario I get wrong. And it's the one where "nobody warned me" is not an acceptable excuse.
How to Address an Envelope to Canada
I'm including this because when our Toronto office opened, I spent an embarrassing amount of time figuring out how to address envelopes to Canada properly. The USPS recommendation is straightforward, but it's not intuitive if you've never done it:
- Use all caps
- Put the Canadian address in the same order as the US: name, street address, city, province abbreviation, postal code
- The postal code goes on the same line as the city and province
- Write "CANADA" on the last lineâin English, in all caps
- Don't use a Canadian province abbreviation that looks like a US state abbreviation (e.g., "ON" for Ontario could be confused with Ontario, California if the country line is missing)
I assumed the Canadian postal code format would be the hardest part to mess up. It wasn't. The issue was that I kept writing the country name in lowercase and the sorting facility flagged it. One envelope got returned.
Now I keep a note in our vendor file with the exact envelope format for Canada, UK, and Germany. I check it every time. Five minutes of verification beats five days of wondering whether a $200 wave of mailings went out with the wrong format.
Paper Stock: The Detail That Affects Every International Shipment
Heavier paper costs more to ship. That sounds obvious, but you'd be surprised how often I've quoted an international brochure print on 100 lb cover because it "feels premium" and then had the shipping cost exceed the print cost.
"Paper weight conversions (approximate): 20 lb bond = 75 gsm (standard copy paper); 24 lb bond = 90 gsm (premium letterhead); 80 lb text = 120 gsm (brochure weight); 100 lb text = 150 gsm (premium brochure); 80 lb cover = 216 gsm (business card weight); 100 lb cover = 270 gsm (heavy business cards)."
For international orders, I default to 80 lb text for brochures unless the piece is a leave-behind that needs to impress in person. It's lighter, ships cheaper, and holds up fine in an envelope.
How to Know Which Scenario You're In
If you're still not sure where your order fits, here's the decision logic I use:
Is the piece going to be filled out, written on, or used for internal tracking? â Scenario A. Templates, consistent specs, and coupon math matter more than design nuance.
Does the piece need to convey brand personality or visual impact? â Scenario B. Spend the time on proofing and resolution. Cheaping out on proofing is the most common regret I hear from other purchasers.
Does the piece cross a border, require special handling, or go to a recipient who needs clear formatting? â Scenario C. Slow down. Check the format. Do not assume.
Most of my orders are A. Some are B. The C orders are rareâmaybe two or three a yearâbut they're the ones where a five-minute checklist has saved me from $400 mistakes.
The One Habit That Applies to All Three
I created a 12-point checklist after my third mistake (the Canadian envelope return, which cost us a week and $180 in reprinting and reshipping). It lives in a Google Doc. Anyone on my team can use it. The list includes template verification, color mode confirmation, resolution check, promo code comparison, and international format notes.
I want to say it's saved us $8,000 in potential rework. I'd have to check the exact number, but it's somewhere in that range. The point isn't the dollar figureâit's that the checklist takes five minutes and catches the stuff I used to miss when I was rushing.
Five minutes of verification beats five days of correction. That's not a slogan. That's the lesson I keep relearning every time I skip a step because "it's basically the same as last time."
It's not. It never is.
Ready to Explore Print-on-Demand?
Get a personalized cost analysis and publishing strategy consultation from Lightning Source experts
View Our Services